The Linkifun MT23 supports optional Tire Pressure Monitoring System (TPMS) sensors that allow you to track tire pressure in real time, enhancing safety and performance on every ride. Follow this step-by-step guide to pair the sensors correctly and ensure accurate monitoring.
✅ Preparation Before Pairing
If you've previously attempted pairing but were unsuccessful:
-
Go to the TPMS settings on your MT23 screen.
-
Delete any existing pairing records to avoid interference or conflict.
📲 Step-by-Step TPMS Pairing Guide
1. Tap “Bind Device”
-
On your MT23, navigate to Settings > TPMS.
-
Tap “Bind device.”
-
A spinning circle (loading animation) will appear, indicating the device is ready to detect a sensor signal.
2. Mount the Sensor
-
While the screen shows the spinning circle, screw the TPMS sensor onto your tire’s valve.
-
The sensor will detect a pressure change and automatically pair with the MT23.
3. Confirm Successful Pairing
-
When live tire pressure values appear on the screen, the pairing has been completed successfully.
⚠️ Important Notes
-
No front/rear distinction: The sensors are not pre-assigned to front or rear tires. You can choose which wheel to install them on during pairing.
-
Pairing validity check: If pressure values appear instantly after tapping "Bind device" (without waiting for the spinning circle), the pairing may not be valid. Only values that show up after the loading animation starts indicate a successful pairing.
🎥 Watch the Demo
YouTube: https://youtu.be/mI1_FGlH7Yw
❓Need Assistance?
If you have any questions or need further help, contact our support team anytime at support@linkifun.com.
We’re here to help you ride smarter and safer. 🏍️💨