If you’ve experienced issues with the TPMS app crashing on your Linkifun™ MT23 motorcycle screen, don’t worry—we’ve released a new firmware update on August 6, 2025, to resolve this and improve overall system performance.
To ensure your MT23 is always running smoothly, follow this simple step-by-step guide to update your firmware.
⚡️ Important Notes Before You Begin
-
Ensure the MT23 is installed on a 12V motorcycle and remains powered on throughout the entire upgrade process.
-
Connect your device to a stable Wi-Fi or SIM network before starting the update.
-
Do not power off the device during the upgrade.
📲 Step-by-Step Firmware Update Instructions
-
Connect to the Internet
Make sure your MT23 is connected to a stable internet source (Wi-Fi or SIM card). -
Go to System Update Menu
On your MT23 screen, navigate to:Settings > About Device > System Update -
Download the Latest Firmware
You should see a new update available (dated 2025-08-06).
Tap Download and wait for the download to complete. -
Install the Firmware
Once the download is complete, tap Install Now.
The device will begin installing the update. -
Reboot the Device
After installation, follow the on-screen prompt and tap Reboot Now.
Wait for the device to restart. -
All Done!
Your MT23 is now updated. You may safely power off or disconnect the device if needed.
🎥 Need Help? Watch the Update Video Guide
For a visual walkthrough, please refer to the instructional video below:
📹 https://youtu.be/JdH-b9M-Sus
If you need any assistance during the update, feel free to contact our support team at:
📧 support@linkifun.com
Stay safe and enjoy the ride with your upgraded MT23! 🏍️✨